Auger discharge silo

Sneglesilo ikoner Sneglesilo






Auger discharge silo is the perfect choice for
the storage and discharge of meal feed and
other light materials that often cause baulking.

The silo is modular and share not only
components with the BM Modular silo, but also
advantages such as long service life, galvanized
plate sections, many combination options and
good hygiene.

Download installation instructions

 

Measurements
(mm)
Height
(m)
Contents
(t)
Motor size
Nom. capacity ton/t
Load metre

Installation
hours
1050 x 1700 1.39 - 4.91 0.22 - 2.28 1.5 kW / 7.8 2.10 2 - 6
1300 x 1950 1.52 - 6.04 0.46 - 4.69 1.5 kW / 7.8 2.10 2 - 6.5
1550 x 2200 1.94 - 5.46 0.83 - 5.64 2.2 kW / 7.8 2.65 2 - 7.5
2050 x 2700 2.28 - 5.82 2.00 - 10.70 3.0 kW / 4.6 3.15 3.5 - 11
2550 x 3200 2.68 - 7.72 4.10 - 23.70 3.0 kW / 4.6 3.50 4.5 - 15.5
3000 x 3650 3.05 - 8.09 6.70 - 34.10 3.0 kW / 4.6 3.75 4.5 - 20

* Additional information about calculating installation hours

Specifications

The bottom hopper has two vertical sides and two sides with a 60° angle. Running the length of the hopper is a sturdy 152 mm trough auger.

The trough auger is open along the section length. The auger flight has two different pitches to allow uniform discharge.
The Q-16 outlet of the trough auger is located outside the silo, so that the contents only run out when the auger is running. The auger is powered by a heavy duty worm gear motor, operating at a standard speed of 93 RPM. A wide range of worm gear motors allow you to change the auger capacity.

The agitator can be mounted for particularly difficult materials. Model 100 - 200 agitators are available with a chain drive powered by the auger motor or a separate worm gear motor. Model 250 and 300 agitators are only available with the worm gear motor making sure that the agitator only runs wenn nessesary.

The injection unit complete with tanker lorry connection flange, piping, filter box and filter bag can be supplied with the silo or fitted subsequently without any problems.

The leg length has been adjusted to allow trough augers and screw conveyors to be mounted under the silo discharge. Naturally, the outlet height can be changed as required using our wide range of extension legs.

Standard equipment
The auger discharge silo is available with an inspection door, inspection glass, steel cover and trough auger with worm gear motor.

Optional equipment as injection unit, level sensors, vibrators and connecting pieces for augers and feed system inlets, etc can be delivered.

 

Similar products

  Optional equipment

BM Cleansilo BM Modulsilo    BM Transportudstyr BM tilbehør
BM Clean
silo
BM Modular
silo
  Transport
equipment
Accessories