Clean silo 100 - 150
|Measurements (mm)||Height (m)||Contents (t)||Load metre||Installation hours|
|1050 x 1050||1.20 - 6.60||0.22 - 2.94||0.50||1 - 5|
|1300 x 1300||1.20 - 6.60||0.46 - 4.82||0.81||1 - 5.5|
|1550 x 1550||1.55 - 6.95||0.87 - 7.32||0.93||1 - 6.5|
The actual container is without inner stiffernes. Where all the bolts and nuts only is mounted externally.
Thereby you are secured that the silo does not give foreign objects in the material flow.
The optimated leg design and bottom cone without partition gives two obvious benefits – a nicer finish and a shorter assembly time.
All panel sections are galvanized to give a long service life. The smooth steel panels ensure good internal hygiene and optimum silo discharge. The panels can withstand high-pressure cleaning.
The modular system ensures a wide range of combinations which can easily be adapted to your needs and space. Each module is made of plate parts which are easy to install on site.The height of types 100 and 125 can subsequently be increased to the largest model in the series in question.
Installation in existing buildings is not a problem, as all silo parts can pass trough a standard doorway.
The bottom cone Is delivered with 60° cone and the silo outlet measures 300x300 mm with a flange that fits on BM suction boxes.
The leg length
The legs are available in standard lengths ranging from 100 cm to 300 cm in increments of only 10 cm.
They have been adapted to suit most of the suction points, but can of course be adjusted as required.
Standard equipment BM Cleansilo is delivered with an inspection hatch and divided steel cover which help installation for centre filling.
Optional equipment as injection unit, level sensors, vibrators and connecting pieces for augers and feed system inlets, etc can be delivered.