Transport Conveyor for wood pellets102 mm
BM Screw conveyor is made from components
with all external parts fully galvanized.
Nominal capacities T/H
|Worm gear motor|
|Inlet angle 15°||3.4||5.1||7.3|
|Inlet angle 30°||3.0||4.6||6.5|
|Inlet angle 45°||2.4||3.6||5.1|
|Inlet angle 60°||1.8||2.7||3.9|
102 mm piping has been used for this screw to ensure a capacity that meets most demands, e.g. in connection with the production of feedstuff. Complete extensions with piping, screw, connection flange and shaft are available in 0.5 - 1.0 - 2.0 and 3.0 m lengths. The maximum conveying length is 10 metres.
The drive is normally placed at the outlet end and is available with a a worm gear motor. The standard outlet is Ø150 mm or OK160.
Beet and wood pellets are normally too big and heavy for conveying in a standard screw. We have therefore designed a special screw sized for this task.
Four different inlets ensure optimum flexibility. All standard inlets are supplied with a bottom bearing as standard.
45° outlet, intermediate bearing, extra inlet/outlet, level control, cover plates, connectors and extension sides for 300x300 mm inlets.
15° inlet angle
30° inlet angle
45° inlet angle
60° inlet angle