Galvanised sections (Z275) offer long-life durability, ensuring good internal hygiene and optimum silo discharge. The panels can resist high-pressure cleaning. The silos are also available in stainless steel.

 

All of the silo’s side panels have external flanges with downfolded edges that seals the horizontal joints. The flanges and the heavy duty rubber filler strips ensure that the silo is completely sealed.

 

45° roof with an efficient cyclone and injection pipe is standard. The cyclone top venting unit is protected by a rain cap. The silo is also available without the injection system, when filled using mechanical conveying systems.

 

The bottom cone is available with two different angles. The 45° cone is suitable for easy-flowing materials. The discharge flange is 300x300 mm and supplied with one shut-off slide. The 60° cone is ideal for materials with flow challenges. The discharge flange is 500 x 500mm and has two 250x500mm shut-off slides.

 

By using the two outlets alternately you can ensure that old materials are never left behind in the silo.

 

The leg length can be adapted to allow most feed system inlets and augers to be fitted under the silo. The discharge height can be adjusted as required through our full range of extension legs.

 

Standard equipment - Injection pipe, injection connection flange, cyclone with rain cap or vent pipe, inspection door with window, manually operated shut-off slide and expansion bolts for fastening to the base.